Added support for Kafka headers to be passed and retrieved from functions. The headers and supported and work only for Kafka version 0.11.0.0 and higher.
* Optimize router response time by adding update lock
In 0.9.2, the router sends multiple GetServiceForFunction requests to executor
to get the service URL. However, the response time of executor will increase
under high-concurrency situation due to too many requests are waiting for
processing.
To solve the problem, an update lock was added to the router. All of goroutines belongs
to the same function need to grab the update lock before sending the request.
Only the first goroutine which gets the update lock is allowed to send request.
In this way, we reduce the burden of executor and lower the failure rate.
The Round Tripper parameters of timeout, keep alive time and Max retry
times is configured in router system environment.
And they are set to Round Tripper when router service initializing.
This setup new nested structure `tsRoundTripperParams` to transfer them.
For archives bigger than 256K, the Storage service was called from the client side, this needed few environment variables to be set. This change uses port forwarding to achieve the same and does not need environment variables to be set.
It is mandatory (from this release onwards) for function to refer to secrets, config-maps and packages in its own namespace to ensure isolation of users sharing the same cluster.
This change runs a pre-upgrade job to verify function references for all functions created prior to this release and fails the upgrade by printing a list of functions that violate this restriction.
Ingress integration to allow the optional creation of ingress for a given route. The ingress controller needs to be set up by the user separately so that ingress path is accessible outside the cluster.
This feature allows creation of fission objects in different namespaces, in addition to retaining the existing behavior of creating fission objects in default namespace if user doesnt provide one.
It also removes cluster admin roles for fission-fetcher and fission-builder Service Accounts and grants them only those privileges that they need.
This makes set up easier for new users. Users can still set
FISSION_NAMESPACE but it will default to "fission". Users can also
still set KUBECONFIG, but it will default to $HOME/.kube/config.
Also, update the post-install chart notes.txt and the install guide to
use "fission function test" as the first step after install. This
means that if there's anything wrong with the setup, the user will see
useful errors instead of "internal server error". Also, they can test
their setup without worrying about nodeports or ingresses or whatever.
All existing functionality of FISSION_URL and FISSION_ROUTER continues
to work.
This the very first step for fission to integrate with Istio, which is an open platform to connect, manage, and secure microservices. With Istio, users are able to monitor functions usage and trace requests latency through dashboards. For more information, please visit http://fission.io/docs/
setting serviceType to ClusterIP as default for fission controller and corresponding changes in fission cli to be able to port-forward the controller pod.
These commits implement support for consuming messages from an Azure storage queue to trigger Fission functions.
* Add stubbed Azure message queue implementation and modify Helm charts.
This commit stubs an implementation for an Azure storage message queue trigger
that will be completed by future commits.
It also modifies the Helm chart to add support for deploying Fission with an
mqtrigger configured for Azure storage queue triggers.
* Add Azure Go SDK to glide.
This commit adds the Azure Go SDK to glide for the upcoming work to support
Azure storage queue triggers.
* Implement Azure message queue trigger.
This commit implements a message queue trigger based on Azure storage queues.
Required message queue trigger manager environment variables:
* AZURE_STORAGE_ACCOUNT_NAME - the Azure storage account to use.
* AZURE_STORAGE_ACCOUNT_KEY - the Azure storage account key.
When creating a message queue trigger, the topic will be the Azure storage
queue to receive messages from.
* Add CA certificates to fission-bundle.
This commit adds the root CA certificates to the fission-bundle image. This
allows Fission to contact third-party APIs that use HTTPS with root CA
signed certificates.
* Add Makefile to build and test.
This commit adds a simple Makefile for building the client and bundle, running
tests, creating the Docker image, and pushing the Docker image.
A newdeploy backend which uses new deployment to serve requests. This is the second phase of #193 and builds on top of changes in #384 .
* Executor layer added on top of pool manager
* Removed the external server for executor
* Minor changes to keep existing semantics as much possible
* Separating the executor vs. poolmgr backend functionality and associated data members
* Executor logic separated from Poolmgr backend completely, placeholder for new backend
* Changed references to poolmgr in tests
* Moved poolmgr to it's package, as a side effect moved Cache to its's package (was causing cyclical dependency) and had to make some data structures exposed outside package
* Rebased from master and changed references to tpr -> crd
* Executor layer added on top of pool manager
* Executor logic separated from Poolmgr backend completely, placeholder for new backend
* Changed podName to a generic objectReference in fscache (#391)
Changed podName to a generic objectReference in function service cache implementation.
* Moved poolmgr to it's package, as a side effect moved Cache to its's package (was causing cyclical dependency) and had to make some data structures exposed outside package
* Rebased from master and changed references to tpr -> crd
* Merged from master with latest changes
* Executor layer added on top of pool manager
* Removed the external server for executor
* Minor changes to keep existing semantics as much possible
* Separating the executor vs. poolmgr backend functionality and associated data members
* Executor logic separated from Poolmgr backend completely, placeholder for new backend
* Changed references to poolmgr in tests
* update compiling.md to use helm
* Compile instructions: changed pullPolicy to IfNotPresent (#378)
Containers will get stuck in ErrImagePull/ImagePullBackOff state otherwise
* Moved poolmgr to it's package, as a side effect moved Cache to its's package (was causing cyclical dependency) and had to make some data structures exposed outside package
* Fetcher called when pod is created for newDeploy backend but also supports older way, this is WIP and still needs pod specialization and creating & exposing a service so the URL can be hit by end user
* WIP Specializing the POD as part of startup along with fetching
* Working specialization of a new deployment. Needs some work on caching, cleanup etc.
* Switched to service based address instead of POD address
* Minor formating issue fixed
* Added logging to pods and a readiness check, the readiness check is flaky though ATM
* Fixed some rebase issues that were failing build
* Better names for K8S objects and methods
* Switched usage of FuncSvc in backends from pod to api.ObjectReference
* Adding retry to fetcher request, for now just using default retry client which might need tweaking in future
* Switching to plain old retry, some issue in getting retryablehttp with glide import
* Removed stale executor service & deployment from previous merge
* Addressed review comments, still testing some areas
* Added types in FunctionSpec
* Resolved conflicts due to merge from executor_abstraction branch
* Added backend type on EnvironmentSpec along with operations for create/list/update, the pools are created/destroyed based on change in backend type
* Backend from types and a minor err return issue fixed
* Draft version of CPU and memory parameters added to environment
* Added resourceReq to newDeploy, though it has some issues
* Issue with resourceName fixed, now newdeploy pods also pick up resources from the environment config
* Adding scale params, removing validation on CPU params for now
* Fixed a formatting issue
* Checking if slight more delay helps in the test which is currently failing for internal routes
* The resourceList newly added in Env can not be compared by compiler, hence must use breakdown comparison instead
* Added strategy selection on client side
* Added caching, informers, delete operations for newdeploy backend functions
* Deleted a stale directory
* A simple HPA based on scale parameters, testing still WIP
* Fixed a small issue in delete function, added HPA delete too when deleting a function
* Previous merge missed the pkg flag for update fn command somehow, fixed that
* Fixed comments from review
* Changed poolmgr cleanup to be generic cleanup and moved to executor, added instanceID labels to newdeploy so that cleanup works
* Moved instanceIdLabel to types to avoid cyclic dependency
* More review fixes
* Tweaking sleep to see results
* If user does not provide poolsize, then it should not default to zero
* Switched to naming convention for now, fixed default poolsize if not provided
* Changed error return behaviour in delete fn, also changed cleanup to look based on obj type though support for additional type will need more work
* Changed check location so avoid false logging
* Test for newdeploy backend
* Adding tests for poolmgr backend
* Fixed an issue with glide dependency version, already fixed in master
* Added instanceId for NewDeploy, Initial cleanup now cleans older objects of newdeploy backend, removed eagercreate flag and instead using minScale to drive eager creation
* Moved cleanup to executor layer with cleanup for newDeploy backend, changes to use the new Cache impl
* Cleaning up pod & rs along with deployment for newdeploy backend
* Enhanced fn and env listing to show min/maxscale and resuorces respectively
* Added conditional heapster deployment and fixed a small issue with resources for fetcher container in function pod
* Addressed review comments from previous change
* Addressed some more review comments - majorly create only on NotFoundError
* Added TargetCPU as an input for scaling
* Bumped target CPU to be greater than 0 and added a default value
* Min replicas should be 1 even if the minScale is 0 when creating deployment
* Changed name from 'backend' to executorType, added additional test for minscale 0 case, changed TargetCPU to TargetCPUPercent
All functions have a pkg reference. This can be a package with either source and a deploy archives, or, a deploy archive. Everytime a function is updated, a new package is created. With archive pruner, the archives that are pointed to by old pkg reference can be deleted from the storage.
* High level spec for package pruning.
* Skeleton for archive pruning
* Adding meat 1 to skeleton.
* Adding meat #2. Separated storage service into a httpHandler component and
Storage Layer component.
* Adding meat #3. getOrphanedArchives in pruner and getItems on
stowClient.
* Restructured archivePruner methods.
* Commiting the day's work. Ready for testing #1.
* Fixing compile errors.
* Test ready. added a few logs for debugging.
* Adding a filter for getItems in stowClient.
* After testing.
* Added a test for archivePruner.
* Adding helm value pruneInterval for testing.
* Modified test.
* Final test.
* Fixing interval from seconds to minutes.
* Small change.
* Changing debugs to info.
* Removing the WIP design
* Ran gofmt on all these files.
* Fixing prune_interval as string in ENV var.
* Addressing all comments, but one.
* changing getFile method in stowClient to stream it into a response.
* All comments incorporated.
* Introducing a new flag for running archivePruner.
1. This flag is disabled for archivePruner to run in unit test.
2. This flag is enabled for archivePruner to run in production.
3. Also disabling test_archive_pruner.sh in this PR. Follow up with
next PR to enable it.
* Addressing review comments.
* Changing the command to generate a file dynamically.
* Enabling arching_pruner_test
* giving execute permissions to test_archive_pruner.sh
* Making changes of positional parameters after recent commit.
Change test case permission and removing kubectlPortForward.
* Adding debug to see why test_utils.sh passed junk pruneInterval.
* shell needs special handling for positional parameters from 10.
* Add readiness probe
* Remove builder manager http api interface since we don’t use/need it
* Check environment builder status and block build requests until builder is ready
* Replace deprecated api extension interface
* Add healthy check to python env
tested fission on openshift 3.7.0 and installed fine, without having to use openshift variables
those variables were used prior to switching to custom resource definitions, and as such are obsolete
This change adds a layer of abstraction over poolmgr. Poolmgr is now just one of the ways to turn a function into a service; other implementations will be added. The executor abstraction is a uniform API over all these implementations.
* Executor layer added on top of pool manager
* Removed the external server for executor
* Minor changes to keep existing semantics as much possible
* Separating the executor vs. poolmgr backend functionality and associated data members
* Executor logic separated from Poolmgr backend completely, placeholder for new backend
* Changed references to poolmgr in tests
* Moved poolmgr to it's package, as a side effect moved Cache to its's package (was causing cyclical dependency) and had to make some data structures exposed outside package
* Rebased from master and changed references to tpr -> crd
* Executor layer added on top of pool manager
* Executor logic separated from Poolmgr backend completely, placeholder for new backend
* Changed podName to a generic objectReference in fscache (#391)
Changed podName to a generic objectReference in function service cache implementation.
* Moved poolmgr to it's package, as a side effect moved Cache to its's package (was causing cyclical dependency) and had to make some data structures exposed outside package
* Rebased from master and changed references to tpr -> crd
* Merged from master with latest changes
* Removed stale executor service & deployment from previous merge
* Addressed review comments, still testing some areas
Remove the `logger` container from the logging daemonset.
Remove the outgoing call from the poolmgr to the logger. Use Fluentd's Kubernetes filter to add function name and UID to influx metadata.
This means fluentd now figures out when to start collecting function logs on its own, without being informed by poolmgr. This is great for other execution strategies, and for autoscaling, where fission isn't in direct control of function pod creation.
Also adds an integration test to make sure logging keeps working.
Switch Fission's storage over to the new CustomResourceDefinitions, from the deprecated ThirdPartyResources. This allows us to be compatible with Kubernets 1.8 and onwards.
This also adds a CLI tool for dumping state from an old fission version and restoring state into new CRDs.
The storage service is unaffected by this change.
This change orchestrates function builds.
Environments (in v2) define a builder image, just like they do a runtime image. The builder image contains a build script that's invoked with source and deployment paths (as env vars).
The buildermgr watches for environments with build images defined, and creates build deployments and services.
Functions can define source and deployment. Buildermgr watches for functions with source code (and build status == pending) and invokes the environment's builder when appropriate. It captures logs from the build and sets the build status (success/failure) and build lots into the PackageStatus.
Split out the Package type into a first class Kubernetes resource. Before this change, packages were implicitly tied to functions.
This wasn't ideal because:
* Functions will need to share packages
* A package storage system may be more generally useful than just
functions (for example, for storing static assets)
This change does the following:
* Updates the fission and tpr types to add a new Package and PackageSpec. It also creates a PackageRef type, and a FunctionPackageRef type. The PackageRef simply references a package, but the FunctionPackageRef includes the name of a function within the package. This allows us to share packages between different functions.
* Updates fetcher and other components for first-class packages
* Allows customization of fetcher image pull policy in the helm charts
